Quick answer: A WHS audit is an independent, structured check of how your business manages health and safety, assessed against criteria agreed before the audit starts. Those criteria can include Queensland WHS legislation, codes of practice, your own procedures or ISO 45001, and each is a distinct benchmark. Depending on the agreed scope, a Brisbane audit can involve a document review, a site visit, interviews and sampling of records, followed by a written report with findings and recommendations. The scope, the number of sites and the depth of the review decide how long it takes.
If you've been asked for a WHS audit by a client, a principal contractor or your own board, the first question is usually "what does it actually involve?" This article explains what a WHS audit covers, how the process runs, and what you should expect to receive at the end. If you're still deciding whether you're ready for one, start with our article on how to know if your Brisbane business is ready for a WHS audit.
WHS audit, OHS audit or safety audit?
The terms are often used interchangeably. "OHS" (occupational health and safety) is the older term, and Queensland moved to the harmonised Work Health and Safety laws in 2012, so "WHS" is now the usual term here. Whatever it's called, audits differ in their objectives and scope. One might check legal compliance, another conformity with ISO 45001, another a specific risk such as traffic management. What matters is the objective and scope agreed before the audit starts, not the label.
What a WHS audit covers
The exact scope is agreed up front, but a general WHS audit typically looks at:
- Governance and responsibilities, including how officers stay informed about safety
- Hazard identification, risk assessments and risk registers
- Safe work procedures, and SWMS for high-risk construction work
- Training, licences, competency and supervision
- Consultation with workers and health and safety representatives
- Contractor and labour hire management
- Incident reporting, investigation and corrective actions
- Emergency preparedness
- Plant, equipment, inspection and maintenance records
- Whether actions from previous audits or inspections were closed out
- Whether operational controls are actually implemented and effective on site
A good audit verifies that controls are implemented and working in practice, not just that the documents exist.
How the audit process works
The steps below are typical. Which of them are included, and how deep each goes, depends on the agreed scope.
- Scope and criteria: agree the sites, activities and standards the audit will measure against.
- Document review: examine policies, procedures, registers and records, where included in the scope.
- Site visit and sampling: observe work, check a sample of controls and records, and talk to people where the work happens, where a site visit is in scope.
- Interviews: speak with managers, supervisors and workers to check how the system works day to day, where agreed.
- Closing discussion: walk through the main findings with your nominated contact, and raise any serious risk straight away.
- Report and action plan: issue a written report with findings, evidence and prioritised recommendations.
What you get at the end
A useful WHS audit report gives you more than a list of problems. It sets out the findings, the evidence behind each one and practical recommendations. Whether the report also classifies findings, assigns risk ratings, or includes a corrective action plan with suggested owners and timeframes depends on the scope agreed at the start, so it's worth confirming the deliverables before the audit begins. Many businesses also want a short summary for directors, which helps officers meet their due diligence duties. Our article on officer due diligence in Queensland explains why that matters.
Hypothetical example: a Brisbane warehouse audit
This is a hypothetical example, not a real client, showing the kind of findings a warehouse audit can produce. Imagine a distribution business in Brisbane's south asks for an audit after adding a second shift. The auditor reviews the traffic management plan, forklift licences, racking inspection records and the induction for casual workers, then watches a loading dock during a busy period.
Typical findings in that setting could include pedestrian exclusion zones that are marked but not enforced at the dock, a racking inspection that is overdue, and an induction that doesn't explain the traffic plan to new casuals. Each finding comes with a recommended fix and a priority, so management knows what to address first.
Audit, inspection or internal audit?
| Who carries it out | Purpose | |
|---|---|---|
| WHS audit | An independent consultant or auditor engaged by your business | Check how well your safety system works against agreed criteria |
| WHSQ inspection | An inspector from Workplace Health and Safety Queensland | Check compliance with the law; can result in notices |
| ISO 45001 internal audit | Impartial, competent internal staff or an external consultant | Check conformity with ISO 45001, often before certification |
If you're preparing for a possible regulator visit, our article on what WHSQ looks for during a workplace inspection covers the inspector's side.
How long does it take, and how often?
There is no fixed timeframe. A single small site with good records takes less time than several sites with high-risk work. The scope and timing are confirmed before the audit starts.
It helps to separate three different drivers of audit frequency:
- Legal duties. Queensland WHS laws don't set a general frequency for WHS audits, but businesses must manage their risks and review control measures in specific circumstances, and officers must verify that safety resources and processes are in place and used.
- Contractual requirements. Some clients, principal contractors and tenders require audits at set intervals.
- Management system audit programmes. If you hold or are working towards ISO 45001, the standard requires a planned programme of internal audits.
Many businesses also schedule an audit after significant changes, such as new sites, new activities or a serious incident.
Book a WHS Audit in Brisbane
Need an independent review of your workplace safety arrangements? Overwatch Safety Solutions provides WHS audits and workplace inspections for Brisbane businesses, including construction, warehousing, transport and general industry. We tailor each audit to your operations, risk profile and agreed requirements, providing clear findings and practical recommendations.
Request a WHS Audit Quote. Contact our team to discuss your site, audit objectives and proposed timeframe. See our Brisbane WHS consulting page to get in touch.
Frequently asked questions
Is a WHS audit a legal requirement in Queensland?
Not generally as a standalone requirement. However, businesses must manage their WHS risks, and officers must take reasonable steps to verify that safety resources and processes are in place and used. An independent audit is a common way to do that. Separately, some contracts require audits, and ISO 45001 requires a programme of internal audits.
Can a WHS audit cover more than one Brisbane site?
Yes. A multi-site audit can use consistent criteria across all sites, with a separate report for each one and a combined summary for management.
Is the auditor the same as a WHSQ inspector?
No. A WHS audit is commissioned by your business to help you improve. It is separate from the regulator. If the auditor finds a serious uncontrolled risk, they raise it straight away with your nominated contact so it can be dealt with.
Sources: Work Health and Safety Act 2011 (Qld), sections 19 and 27; ISO 19011:2018, Guidelines for auditing management systems.
Last reviewed: November 2026.